THN 20-2410

DC/DC Converter THN 20 Series, 20 Watt • Smallest encapsulated 20 W Converter! Ultra compact size: 1.0" x 1.0" x 0.4" • Shielded metal case with isolated baseplate • • • • • Wide 2:1 input voltage ranges • • I/O isolation voltage 1500 VDC • 3-year product warranty Very high efficiency up to 90% UL 62368-1 IEC 62368-1 Output voltage adjustable Remote On/Off control Operating temp. range –40°C to +75°C and up to 85 °C with heat-sink Input filter meets EN 55022 class A without external components The THN 20 series is the latest generation of high performance DC/DC converter modules with highest power density. The product achieves 20 W output power while it comes in a metal case with dimensions of only 1.0" x 1.0" x 0.4". All models have a wide 2:1 input voltage range and precisely regulated output voltages, even under no load conditions. Highest efficiency of up to 90% makes this product very reliable and applicable in temperature ranges of up to 75°C or 85°C with optional mounted heat sink. Together with low input current characteristics at minimal load and remote On/Off control these converters are the ideal solution for battery-operated systems. Typical applications are in mobile equipment, instrumentation, distributed power architectures in communication and industrial electronics and everywhere where space on the PCB is critical. Models Order Code Input Voltage Range THN 20-1210 THN 20-1211 THN 20-1212 THN 20-1213 THN 20-1222 THN 20-1223 THN 20-2410 THN 20-2411 THN 20-2412 THN 20-2413 THN 20-2422 THN 20-2423 THN 20-4810 THN 20-4811 THN 20-4812 THN 20-4813 THN 20-4822 THN 20-4823 9 - 18 VDC (12 VDC nom.) 18 - 36 VDC (24 VDC nom.) 36 - 75 VDC (48 VDC nom.) Output 1 Output 2 Vnom Imax 3.3 VDC 5 VDC 12 VDC 15 VDC +12 VDC +15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC +12 VDC +15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC +12 VDC +15 VDC 4'500 mA 4'000 mA 1'670 mA 1'330 mA 833 mA 667 mA 4'500 mA 4'000 mA 1'670 mA 1'330 mA 833 mA 667 mA 4'500 mA 4'000 mA 1'670 mA 1'330 mA 833 mA 667 mA Vnom Efficiency Imax –12 VDC –15 VDC 833 mA 667 mA –12 VDC –15 VDC 833 mA 667 mA –12 VDC –15 VDC 833 mA 667 mA typ. 89 % 89 % 89 % 89 % 89 % 90 % 90 % 91 % 90 % 91 % 90 % 90 % 90 % 90 % 90 % 90 % 89 % 90 % Options THN-HS1 - Optional Heat Sink: www.tracopower.com/products/thn-hs1.pdf www.tracopower.com September 20, 2023 Page 1 / 5 THN 20 Series, 20 Watt Input Specifications Input Current - At no load 12 Vin models: 24 Vin models: 48 Vin models: 12 Vin models: - At full load 24 Vin models: 48 Vin models: Surge Voltage 12 Vin models: 24 Vin models: 48 Vin models: 12 Vin models: 24 Vin models: 48 Vin models: Under Voltage Lockout Reflected Ripple Current Recommended Input Fuse 10 mA typ. 6 mA typ. 4 mA typ. 1'510 mA typ. (3.3 Vout model) 1'960 mA typ. (5 Vout model) 1'960 mA typ. (12 Vout model) 1'960 mA typ. (15 Vout model) 1'960 mA typ. (12 / -12 Vout model) 1'960 mA typ. (15 / -15 Vout model) 755 mA typ. (3.3 Vout model) 970 mA typ. (5 Vout model) 970 mA typ. (12 Vout model) 970 mA typ. (15 Vout model) 970 mA typ. (12 / -12 Vout model) 970 mA typ. (15 / -15 Vout model) 375 mA typ. (3.3 Vout model) 485 mA typ. (5 Vout model) 485 mA typ. (12 Vout model) 485 mA typ. (15 Vout model) 485 mA typ. (12 / -12 Vout model) 485 mA typ. (15 / -15 Vout model) 25 VDC max. (1 s max.) 50 VDC max. (1 s max.) 100 VDC max. (1 s max.) 7.5 VDC min. / 8 VDC typ. / 8.8 VDC max. 15.5 VDC min. / 16 VDC typ. / 17.5 VDC max. 32.5 VDC min. / 33 VDC typ. / 35.5 VDC max. 30 mAp-p typ. 12 Vin models: 4'000 mA (slow blow) 24 Vin models: 2'000 mA (slow blow) 48 Vin models: 1'250 mA (slow blow) (The need of an external fuse has to be assessed in the final application.) Internal Pi-Type Input Filter Output Specifications Output Voltage Adjustment See application note: Voltage Set Accuracy Regulation - Input Variation (Vmin - Vmax) - Load Variation (0 - 100%) Ripple and Noise (20 MHz Bandwidth) - Cross Regulation (25% / 100% asym. load) - single output - dual output single output models: dual output models: single output models: dual output models: dual output models: 3.3 Vout models: 5 Vout models: 12 Vout models: 15 Vout models: 12 / -12 Vout models: 15 / -15 Vout models: –10% to +20% (24 Vout models) ±10% (other models) (single output models only) (By external trim resistor) www.tracopower.com/overview/thn20 Output power must not exceed rated power! ±1% max. 0.2% max. 0.5% max. 0.2% max. 1% max. (Output 1) 1% max. (Output 2) 5% max. 75 mVp-p typ. (w/ 1 µF X7R || 10 µF TC) 75 mVp-p typ. (w/ 1 µF X7R || 10 µF TC) 75 mVp-p typ. (w/ 1 µF X7R || 10 µF TC) 75 mVp-p typ. (w/ 1 µF X7R || 10 µF TC) 100 / 100 mVp-p typ. (w/ 1 µF X7R || 10 µF TC) 100 / 100 mVp-p typ. (w/ 1 µF X7R || 10 µF TC) All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 2 / 5 THN 20 Series, 20 Watt Capacitive Load - single output 3.3 Vout models: 5 Vout models: 12 Vout models: 15 Vout models: 12 / -12 Vout models: 15 / -15 Vout models: - dual output Minimum Load Temperature Coefficient Start-up Time Short Circuit Protection Output Current Limitation Overvoltage Protection Transient Response - Response Time 7'000 µF max. 5'000 µF max. 850 µF max. 700 µF max. 500 / 500 µF max. 350 / 350 µF max. Not required ±0.02 %/K max. 30 ms max. Continuous, Automatic recovery 110 - 190% of Iout max. 150% typ. of Iout max. 112 - 164% of Vout nom. 250 µs typ. (25% Load Step) Safety Specifications Safety Standards EN 60950-1 EN 62368-1 IEC 60950-1 IEC 62368-1 UL 60950-1 UL 62368-1 www.tracopower.com/overview/thn20 PD 2 OVC I - IT / Multimedia Equipment - Certification Documents Pollution Degree Over Voltage Category EMC Specifications EMI Emissions - Conducted Emissions - Radiated Emissions EMS Immunity External filter proposal: Air: Contact: - Electrostatic Discharge - RF Electromagnetic Field - EFT (Burst) / Surge Ext. input component: - Conducted RF Disturbances - PF Magnetic Field Continuous: 1 s: EN 55032 class A (internal filter) EN 55032 class B (with external filter) EN 55032 class A (internal filter) EN 55032 class B (with external filter) www.tracopower.com/overview/thn20 EN 61000-4-2, ±8 kV, perf. criteria A EN 61000-4-2, ±6 kV, perf. criteria A EN 61000-4-3, 10 V/m, perf. criteria A EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±2 kV, perf. criteria A 220 µF, 100 V EN 61000-4-6, 10 Vrms, perf. criteria A EN 61000-4-8, 100 A/m, perf. criteria A EN 61000-4-8, 1000 A/m, perf. criteria A General Specifications Relative Humidity Temperature Ranges - Operating Temperature Power Derating - Case Temperature - Storage Temperature - High Temperature Cooling System Remote Control - Voltage Controlled Remote - Off Idle Input Current - Remote Pin Input Current 95% max. (non condensing) –40°C to +75°C –40°C to +85°C (with Heat Sink) +105°C max. –55°C to +125°C Depending on model See application note: www.tracopower.com/overview/thn20 Natural convection (20 LFM) On: 3.0 to 15 VDC or open circuit Off: 0 to 1.2 VDC or short circuit Refers to 'Remote' and '-Vin' Pin 2 mA typ. -0.5 to 1.0 mA All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 3 / 5 THN 20 Series, 20 Watt Altitude During Operation Switching Frequency Insulation System Isolation Test Voltage Isolation Resistance Isolation Capacitance Reliability Washing Process Environment - Input to Output, 60 s - Input to Case, 60 s - Output to Case, 60 s - Input to Output, 500 VDC - Input to Output, 100 kHz, 1 V - Calculated MTBF - Vibration - Thermal Shock Housing Material Base Material Potting Material Pin Material Pin Foundation Plating Pin Surface Plating Housing Type Mounting Type Connection Type Footprint Type Soldering Profile Weight Thermal Impedance 5'000 m max. 275 kHz typ. (PWM) (±10%, 3.3 & 5 Vout model) 330 kHz typ. (PWM) (±10%, other models) Functional Insulation 1'600 VDC 1'000 VDC 1'000 VDC 1'000 MΩ min. 1'000 pF max. 1'400'000 h (MIL-HDBK-217F, ground benign) According to Cleaning Guideline www.tracopower.com/info/cleaning.pdf MIL-STD-810F MIL-STD-810F Copper, Nickel plated Non-conductive FR4 (UL 94 V-0 rated) Silicone (UL 94 V-0 rated) Copper Nickel (2 - 3 µm) Tin (3 - 5 µm), matte Metal Case PCB Mount THD (Through-Hole Device) 1" x 1" Lead-Free Wave Soldering 265°C / 10 s max. 15 g 17.6 K/W typ. 14.8 K/W typ. (with Heat Sink) www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7a, 7c-I (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule).) 47872c3c-f3a0-4ad5-ab75-2fa773c171c1 - Case to Ambient Environmental Compliance - REACH Declaration - RoHS Declaration - SCIP Reference Number Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/thn20 All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 4 / 5 THN 20 Series, 20 Watt Outline Dimensions 7.62 5.08 (0.3) (0.2) 1 5.6 9.9 2.5 10.16 (0.22) (0.39) (0.1) (0.4) 3 2.5 4 5 (0.1) Bottom view (1.0) 2 25.4 (0.8) 20.32 6 Pinout Pin Single Dual 1 +Vin (Vcc) +Vin (Vcc) 2 –Vin (GND) –Vin (GND) 3 +Vout +Vout 4 Trim Common 5 –Vout –Vout 6 Remote On/Off Remote On/Off 10.16 (0.4) 25.4 (1.0) Dimensions in mm (inch) Tolerances: ±0.5 (±0.02) Pin pitch tolerances ±0.25 (±0.01) Pin diameter Ø 1.0 (0.04) © Copyright 2023 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. September 20, 2023 Page 5 / 5